STIRRING DRYBATH 8-250 ERL
2mag stirring-heating block combination with 8 stirring positions, 8 bore holes, ø 87.2 mm, depth 78 mm, suitable for 250 ml Erlenmeyer flasks.
Stirring – wear- and maintenance-free thanks to inductive 2mag magnetic drive, wide speed range from 100 to 2,000 rpm with smooth operation even at low speeds, 100% synchronous rotation, 10-stage power setting for high performance with viscous stirring quantities and reduced power for heat-free continuous operation, digital display for speed, power and temperature setting, SoftStart for reliable catching/centering and safe acceleration of the stirring bar.
Heating – Massive heating block made of resistant aluminium alloy, PTFE-coated for increased chemical resistance and easier cleaning, contact adapters for an optimal heat transfer, lowest possible temperature gradient inside the stirring vessels, integrated electrical heater, maximum heating temperature +200 °C. PowerDetect for automatic compensation of physically induced stirring power losses, which can be up to 40% at high temperatures, smallest possible temperature gradient in the sample vessels due to low-loss, all-round energy transfer to the vessel.
Specially made insulated stainless steel frame for energy- and time saving heating process, additionally for a homogenous temperature distribution and protection against accidental contact, independent over-temperature protection inside the plate.
Inclusive separate control unit for operation of magnetic stirrer and integrated heater, for long-term protection of the electronics against aggressive liquids and gases as well as thermal influences, stainless steel housing. Includes 8 contact sleeves for optimized heat transfer.
Stirring-heating block with 8 positions wirbel_mini Fast heating-up up to 200°C Stirring speed from 100 up to 2,000 rpm Borehole diameter 87.2 mm For 250 ml Erlenmeyer flasks Energy-saving Insulated frame Durable quality 3 years warranty Developed and made in Germany
Scope of delivery: STIRRING DRYBATH 8-250 ERL Control unit heatMIXcontrol 8 contact sleeves for Erlenmeyer flasks
| Type | STIRRING DRYBATH 8-250 ERL |
| Stirring points | 8 |
| Stirring point distance | 100 mm/140 mm |
| Bore holes Ø/T | Ø 87.2 / 78 mm |
| Stirring volume / stirring point | 1 – 250 ml |
| Stirring power (max.) | 40 W |
| Power setting | 10 – 100% (10-step) |
| Temperature range | +40 °C up to +200 °C |
| Speed range | 100 – 2,000 rpm |
| Operating voltage | 230 V |
| Heating power (max.) at 230 V | 1,150 W |
| Dimensions (WxDxH) | 335 x 515 x 150 mm |
| Protection category | IP20 |
| Weight (gross) | approx. 40 kg |
| Order no. | 63825 |
| Type | DRYBATH 15-100 | DRYBATH 15 -250 | DRYBATH 8-250 ERL |
| Stirring points | 15 | 15 | 8 |
| Stirring point distance | 65 mm | 84 mm | 100 mm/140 mm |
| Bore holes Ø/T | Ø 57.5 / 48 mm | Ø 71.5 / 78 mm | Ø 87.2 / 78 mm |
| Stirring volume/stirring point | 1 – 150 ml | 1 – 400 ml | 1 – 250 ml |
| Stirring power (max.) | 40 W | ||
| Power setting | 10 – 100% W (10-step) | ||
| Temperature range | +40 °C up to +200 °C | ||
| Speed range | 100 – 2,000 rpm | ||
| Operating voltage | 230 V | ||
| Heating power (max.) at 230 V | 1,000 W | 1,150 W | |
| Dimensions (WxDxH) | 280 x 430 x 120 mm | 335 x 515 x 150 mm | |
| Protection category | IP20 | ||
| Weight (gross) | approx. 20 kg | approx. 35 kg | approx. 40 kg |
| Order no. | 63100 | 63250 | 63825 |
Separate control unit heatMIXcontrol for operation of STIRRING DRYBATH and STIRRING HOTPLATE
High-effective stirring bar
PTFE-coated flexible stirring bar remover
External probe sensor Pt100 for control unit heatMIXcontrol
Stand for vertical positioning of the control unit
Inserts consisting of aluminium alloy for reduction of the borehole diameter of STIRRING DRYBATH