2mag stirring-heating block combination with 8 stirring positions, 8 bore holes, ø 87.2 mm, depth 78 mm, suitable for 250 ml Erlenmeyer flasks.
Stirring - Maintenance-free and wear-free by inductive 2mag-Magnetic Drive concept, extremely wide speed range of 100 to 2,000 rpm, 100% synchronized speed, jerk-free stirring even at low speeds, 10-step power settings of the stirrer, high power setting for viscous liquids and reduced power setting for long-term operation without any heating effects caused by the stirrer, clear digital display for settings of stirrer speed, stirrer power and temperature of the integrated heater, SoftStart procedure for reliable catching/centering and safe acceleration of the stirring bar.
Heating - Massive heating block made of resistant aluminium alloy, PTFE-coated for increased chemical resistance and easier cleaning, contact adapters for an optimal heat transfer, lowest possible temperature gradient inside the stirring vessels, integrated electrical heater, maximum heating temperature +200 °C, PowerDetect for automatic compensation of physically determined loss in stirring power which can come up to 40% at high temperatures, specially made insulated stainless steel frame for energy- and time saving heating process, additionally for a homogenous temperature distribution and protection against accidental contact, independent over-temperature protection inside the plate.
Inclusive separate control unit for operation of magnetic stirrer and integrated heater, for long-term protection of the electronics against aggressive liquids and gases as well as thermal influences, stainless steel housing. Inclusive 8 contact adapters for an optimized heat transfer.
Stirring-heating block with 8 positions Borehole diameter 87.2 mm For 250 ml Erlenmeyer flasks Stirring speed from 100 up to 2.000 rpm Fast heating-up up to 200°C Energy-saving For all vessel sizes and shapes Simple system integration 3 years warranty Developed and made in Germany
Delivery contents: STIRRING DRYBATH 8-250 ERL Control unit heatMIXcontrol 8 redcing adapters for Erlenmeyer flasks
| Type | STIRRING DRYBATH 8 -250 ERL | |
| Stirring positions | 8 | |
| Stirring positions distance | 100 mm/140 mm | |
| Bore holes Ø/T | Ø 87.2 / 78 mm | |
| Stirring volume / stirring point | 1 - 250 ml | |
| Stirring power (max.) | 40 W | |
| Power setting | 10 - 100% (10-step) | |
| Temperature range | +40 °C up to +200 °C | |
| Speed range | 100 - 2,000 rpm | |
| Operating voltage | 230 V | |
| Heating power (max.) at 230 V | 1,150 W | |
| Dimensions (WxDxH) | 335 x 515 x 150 mm | |
| Protection category | IP20 | |
| Weight (gross) | approx. 40 kg | |
| Order no. | 63825 | |
| Type | DRYBATH 15-100 | DRYBATH 15-250 | DRYBATH 8-250 ERL |
| Stirring positions | 15 | 15 | 8 |
| Stirring positions distance | 65 mm | 84 mm | 100 mm/140 mm |
| Bore holes Ø/T | Ø 57.5 / 48 mm | Ø 71.5 / 78 mm | Ø 87.2 / 78 mm |
| Stirring volume / stirring point | 1 - 150 ml | 1 - 400 ml | 1 - 250 ml |
| Stirring power (max.) | 40 W | ||
| Power setting | 10 - 100% (10-step) | ||
| Temperature range | +40 °C up to +200 °C | ||
| Speed range | 100 - 2,000 rpm | ||
| Operating voltage | 230 V | ||
| Heating power (max.) at 230 V | 1,000 W | 1,150 W | |
| Dimensions (WxDxH) | 280 x 430 x 120 mm | 335 x 515 x 150 mm | |
| Protection category | IP20 | ||
| Weight (gross) | approx. 20 kg | approx. 35 kg | approx. 40 kg |
| Order no. | 63100 | 63250 | 63825 |
Compatible control units (included in scope of delivery)
 |
heatMIXcontrol - spare part Separate control unit heatMIXcontrol for operation of STIRRING DRYBATH and STIRRING HOTPLATE |
Suitable accessories
 |
ASTEROID 25 High-effective stirring bar for small volumes |
 |
Stirring Bar Remover PTFE PTFE-coated flexible stirring bar remover |
 |
External probe sensor Pt100 External probe sensor Pt100 for control unit |
 |
Stand for heatMIXcontrol Stand for vertical positioning of the control unit |
| 2mag STIRRING DRYBATH 15-250 |
| Technisch identisch wieSTIRRING DRYBATH 15-100, jedoch mit 15 Bohrungen, ø 71,5 mm, Tiefe 78 mm, Abstand 84 mm, optimiert für 250 ml Laborflaschen und für 400 ml Bechergläser |